AccuMac AM8060 User Manual
Page 19
AM8060 Precision Thermometer
User’s Guide
18/43
5.1 100 Ω calibration
5.1.1 Turn off the power, put the measurement/calibration switch
to the “CAL”side (right side). Please see Figure 3 for details.
5.1.2 After turning on the power，AM8060 shows the calibration
main menu. It can be seen that there are two calibrations
required: 100 Ohm CALIBRATION and 25 Ohm
CALIBRATION.
The following is an illustration of 100 Ohm CALIBRATION.
* CALIBRATION MENU *
> 100 Ohm CALIBRATION
25 Ohm CALIBRATION
Enter = Yes
-------------------------------------------
5.1.3 Use
or
key on the keypad to select the calibration. A
“>” sign will be displayed in front of the selected line. For
example, the above figure shows that 100 Ohm
CALIBRATION has been selected. Pressing the
key will
start the calibration program, and the following display will
appear：