AccuMac AM8060 - Manual (Page 32)

AM8060 Precision Thermometer
User’s Guide
31/43
above the REC key will be turned on. This is to inform
the user that the temperature data is being written to the
flash drive. The saved file name is U2DATA.txt.
5) If users want to stop the data saving, just press REC key
on the front panel. AM8060 will produce a short beep
and the LED above
REC key will be turned off to
indicate the process has been halted.
The following list is an example of data saved in the
U2DATA.txt file on a flash drive. Time column
indicates time in unit of seconds; t1, t2 and t1-t2
indicate temperature readings from sensor 1, sensor2
and difference of two sensors in Celsius. An “end” is
written to the file when
REC key has been turned off.
Time t1 t2 t1-t2
0.23 -4.525 +529.475 -534.000
1.44 -4.524 +529.475 -534.000
2.64 -4.524 +529.475 -533.999
3.85 -4.524 +529.475 -533.999
5.05 -4.524 +529.475 -534.000
6.26 -4.524 +529.475 -534.000
7.46 -4.524 +529.476 -534.000
8.67 -4.524 +529.476 -534.000
end
6) The above operations can be repeated to do multiple
time data saving.
7) The temperature data file U2DATA.txt in the flash
drive can be transferred to a computer. Just unplug the
flash drive when it is stopped (when the LED above the
REC key is off）and plug it into a computer’s USB
connector. Once the flash drive is detected by the
computer’s OS, users can copy the file over normally.