Seed Hawk AIRCART 2012 - Manual (Page 41)

Seed Hawk
®
Manual Aircart Page 36
6.0 AIR DRILL MONITOR INTRODUCTION
The Loup III and Seed Hawk Viper Pro™ monitor are capable of displaying:
- Ground Speed and Acres
- Fan Speeds
- Meter Speeds
- Meter Application Rates
- Hopper Levels
- Liquid Flow Meter
- Hydraulic Pressure
- Field Area
- Total Area
The monitors will alert the operator if it detects any of the following conditions:
-Low Meter Speed
-Low Bin Levels
-Loss of Tractor Ground Speed
-Low or High Fan Speed
These settings, as well as the Field and Total Acres are stored in non-volatile
memory. This means that the information is retained even when power is
disconnected.
This Manual will familiarize you with installation, calibration, operation and
technical information. All aspects are detailed but may not be applicable to your
particular system configuration.
For further information on the operation of the Seed Hawk Viper Pro™ Monitor
see the Raven – Seed Hawk Viper Pro™ manual.