Seed Hawk AIRCART 2012 - Manual (Page 24)

Seed Hawk
®
Manual Aircart Page 19
4.2.1 Positioning the Auger
NOTE
1. Ensure your tractor circuit is
engaged in the correct
direction prior to engaging the
auger diverter valve. If circuit is
already engaged direct the fan
diverter valve to the fill auger
position from the fan location,
: Ensure that the area in the vicinity of auger operation is free of
obstructions and that all bystanders, especially children, are kept
at a safe distance before positioning or operating the auger.
Figure 5. Use the remote
provided to move the auger in
and out of transport. NOTE: If
remote does not operate
properly use manual levers
provided as backup control.
2. Remove locking pin, lift the
locking handle, and swing out to
usable position. Unlock lever by
pushing it down to take the auger
out of transport, Figure 6.
3. Move the outer arm first when
positioning auger, Figure 7.
4. Unfold auger and position it
where filling or emptying the
aircart is optimal.
5. Allow hopper to come into contact
with the ground before final
positioning.
6. Hydraulic cylinder will hold the
auger’s position so it will not
move if positioned on level
ground.
Figure 5
Figure 7
Figure 6