LumaSense Technologies INNOVA 1412i - Manual (Page 17)

Chapter 2
______________________________________________________________________
_____________________________________________________________________________
BE6025-15 1412i Photoacoustic Gas Monitor LumaSense Technologies A/S
Page 17 of 202
cover back in its correct position on top of the 1412i and screw in all
the screws.
2.3 Setting the USB Communication Parameters
The LumaSoft Gas 7810 application with USB communication is able
to communicate with the 1412i gas monitor through a USB cable.
BZ7002 and BZ7003 applications with USB communication are able
to communicate with the 1412i gas monitor through a USB cable.
No setup on the 1412i gas monitor is necessary in order to be able to
communicate with the 1412i gas monitor through an USB connection.
2.4 Setting the RS-232 Communication Parameters
2.4.1 Default RS-232 Communication Parameters
The default RS-232 Communication parameters are as shown in the
table below.