LumaSense Technologies INNOVA 1412i - Manual (Page 115)

Chapter 9
______________________________________________________________________
_____________________________________________________________________________
BE6025-15 1412i Photoacoustic Gas Monitor LumaSense Technologies A/S
Page 115 of 202
If the starting-time of the oldest stored data to be deleted
corresponds with the starting-time shown on the display screen then
press S1 and then S2 to accept that the data will be deleted from
Background Memory.
9.3.4 Obtaining Information in Memory Mode
It is not necessary for the user to remember the numbers of the
locations in Background Memory which have been used to store data.
When the Monitor is operated in Memory mode, users can at any
time find out which locations are used, and what percentage of the
Background Memory’s total data capacity has been used by:
Pressing the INFO push-button:
The numbers appearing on the above display are those, which
contain stored data. The Monitor will show the above “Information
text” display for a short period of time and then automatically change
back to the text, which was showing on the display before the INFO
push-button was pressed.
9.3.5 Upload Memory data using the BZ7003 Offline
Software.
After recalling data stored in any of the background memories to the
display memory see section 9.3.2 . The data now stored in the display
memory can be uploaded using the BZ7003 Offline Software and stored in
excel or text format files. Regarding the use of BZ7003 please refer to the
user manual BE6035
LOCATION(S) USED : 1 - -3 –4 -5 -7 -9 -10
53 % OF MEMORY USED TIME 10 : 26