Fig. 10 attaching motor support, Fig. 9 attachment of motor mount bracket, Fig. 11 motor support arm – Hired-Hand RollSeal Rollup Curtains: ROLLUP CURTAIN SYSTEM Rev 11-05 User Manual

Page 19

Part No. 4801-5138 Rev 11-05

Rollup Curtain System

Page 19

Insert support arm/ motor
assy. into support bracket
as shown.

Hidden view showing
how bolt inserts through
holes in flanges of
bracket & support arm

3/8-16 x 3 Bolt

3/8-16

Nut Lock

IMPORTANT!

Do Not Over Tighten!

ARM MUST SWING FREELY

IMPORTANT! Attach With Curtain
On Bracket Side Of Motor.

Insert end of support arm into bottom of motor mount as shown in Fig. 11. Insert bolt through
attachment hole of bracket, and through attachment hole of support arm. Tighten bolt & nut to
allow arm to swing freely.

FIG. 10

Attaching Motor

Support

7.0" (17.8cm)

1.5" (3.8 cm)

8.0"

(20.3 cm)

6.0"

(15.2 cm)

Nut

3/8-16

Hole Pattern

Washer

Motor mount
bracket

Screw
3/8-16 x 1

5.5" (14.0 cm)

FIG. 9

Attachment Of Motor

Mount Bracket

Vertical column

2.0"

(5.1 cm)

FIG. 11

Motor Support

Arm

Motor

Support

Arm

Attachment

Hole For Bolt

M8 bolt (supplied with

gear box)

Bracket