Hired-Hand Funnel Flow Fans Rev 10-98 User Manual

Funnel flow, Panel fans

MAINTENANCE

2. Blades, motor and wire guards should be
cleaned periodically to decrease vibration and
ensure maximum fan life. Remove dirt with a dry
brush or compressed air.

Plastic Panel Fans Manual Part No. 4801-2991 Rev 10-98

Your Panel fan has been manufactured with the
finest materials and components available and is backed
by a one year warranty against electrical and mechanical
defects in material and workmanship. If this fan fails to
operate during this period, return it prepaid to place of
purchase for repair or replacement without charge at the
manufacturer's option.
Damage by accident or abuse is not covered by this
warranty.
This warranty gives you specific legal rights and you may
have other rights that vary from state to state.

WARRANTY

INSTALLATION

Attach fan by flange to wall.

2. Fan is provided with wire guards for your protection.
National safety codes require that guards be installed

National safety codes require that guards be installed

if fan is installed within 7 feet of floor or

if fan is installed within 7 feet of floor or in reach of

in reach of

personnel or livestock.

personnel or livestock.
FAILURE TO GUARD MOVING PARTS MAY RESULT
IN SERIOUS INJURY OR DEATH.

3. Connect Power Cord and Electrical Power

Unit is now ready for operation.

IMPORTANT: INSPECT FAN FOR ANY OBJECT
THAT MAY OBSTRUCT BLADE ROTATION.

REPLACEMENT PARTS

Part No. Description

6403-0121 SS FF 24" PROP 3 BLADE

3017-5018 Motor 1/3HP 1075RPM

1. Disconnect power source before installing or

servicing fan. Failure to disconnect power source

can result in property damage, serious injury, or

death.

2. When connected to an automatic controller

FAN MAY START AT ANY TIME.

3. When this fan is used in a life support ventilation

system where failure could result in loss or injury,

the user should provide adequate backup ventilation

or accept the risk of such loss or injury.

WARNING:

1. Read WARNING statements before proceeding.

1. Inspect fan for damage in transit.
Check for loose, missing, or damaged
parts.

2. Do not operate fan until you are
completely familiar with its
operation.

BEFORE INSTALLING FAN

READ ALL INSTRUCTIONS PRIOR TO INSTALLATION

Funnel Flow

HIRED-HAND

Panel Fans