beautypg.com

Mounting the device with a magnet – Brocade ICX 6430-C Compact Switch Hardware Installation Guide User Manual

Page 30

background image

1

Drilled holes

2

Wall mount anchors

3

Wall mount screws

FIGURE 14 Wall mounting the ICX 6430-C device

Mounting the device with a magnet

CAUTION

Ensure that adequate ventilation is provided for the system. A 3 cm clearance is recommended
above the device and 8 cm clearance is recommended on each side.

CAUTION

Do not install the switch in a position where it can easily become unstable and fall, causing
injury or damage to the switch.

Use the magnet mount kit to mount the device on a metal wall or a metal surface, including
underneath a metal desk. The magnet mount kit is available for order separately from the device and
consists of a single magnet sheet.

Mounting the device with a magnet

28

Brocade ICX 6430-C Compact Switch Hardware Installation Guide

53-1003080-01