beautypg.com

Wall mount installation – Brocade ICX 6430-C Compact Switch Hardware Installation Guide User Manual

Page 25

background image

5.

Using a Phillips screwdriver, mount the device in a two-post rack using four rack-mounting screws,
as illustrated in the figure below.

1

Rack-mounting screws

2

Cage nuts

FIGURE 9 Installing the device in a two-post rack

6.

If installing a single device only, go to the “Powering on the system” task. If installing multiple
devices, mount them in the rack, one below the other.

Wall mount installation

Use the following items to wall mount the device directly to a wall:

#2 Phillips screwdriver

Hammer

Drill

Wall mount anchors

Wall mount screws

Wall Mount Holes Location template

tape

To mount the device to a wall using the wall mount brackets, see the “Wall mount installation using wall
mount brackets” task.

NOTE
When mounting the device on a wall, Brocade recommends that you mount the device with the port side
down.

Complete the following steps to mount the device directly to a wall.

Wall mount installation

Brocade ICX 6430-C Compact Switch Hardware Installation Guide

23

53-1003080-01