Port, system, and power status leds, Port status leds – Brocade ICX 6430-C Compact Switch Hardware Installation Guide User Manual
Page 14
Port, system, and power status LEDs
An ICX 6430-C device include LEDs that indicate the status of device components:
•
on page 12
•
on page 13 (including power status LEDs)
•
Network connection status LEDs
on page 14
Port status LEDs
1
Port status LEDs
2
PoE/PoE+ LEDs
FIGURE 4 Port status LEDs an ICX 6430-C12 device
Port status LEDs
TABLE 2
LED
Condition
Status
Out-of-band management port (2
LEDs)
Off (right side)
Offline
On/Flashing (left side)
Link-up. Flashing indicates the port is
transmitting and receiving user packets.
On/Green (right side)
1 Gbps Link-up
Right LED off, left LED
on or flashing
10/100 Mbps Link-up. Flashing indicates the port
is transmitting and receiving user packets.
1GbE ports
(1 - 12, Slot 1)
Link/Act
Off (right side)
The right LED on the ports indicates PoE/PoE+
activity and is only active on ports 1-4. On non-
PoE/PoE+ ports, the right LED remains off.
Off (left side)
A link is not established with a remote port.
On/Flashing Green
(left side)
The port has established a valid link at 10, 100
or 1000 Mbps. Flashing indicates the port is
transmitting and receiving user packets.
PoE/PoE+(1 - 4)
On/Green (right side)
The port is providing PoE or PoE+ power to a
connected device.
Port, system, and power status LEDs
12
Brocade ICX 6430-C Compact Switch Hardware Installation Guide
53-1003080-01