Laser compliance, Electrical cautions, Rtc battery – Brocade VDX 6730 Hardware Reference Manual (Supporting VDX 6730-32 and VDX 6730-76) User Manual
Page 79: Electrical safety
Brocade VDX 6730 Hardware Reference Manual
61
53-1002389-06
Electrical cautions
A
Laser compliance
This equipment contains Class 1 laser products and complies with FDA Radiation Performance
Standards, 21 CFR Subchapter I and the international laser safety standard IEC 825-2.
ATTENTION
Use only optical transceivers that are qualified by Brocade Communications Systems, Inc. and
comply with the FDA Class 1 radiation performance requirements defined in 21 CFR Subchapter I,
and with IEC 825-2. Optical products that do not comply with these standards might emit light that
is hazardous to the eyes.
Electrical cautions
RTC battery
CAUTION
Do not attempt to replace the real-time clock (RTC) battery. There is danger of explosion if the
battery is incorrectly replaced or disposed of. Contact your switch supplier if the real-time clock
begins to lose time.
Electrical safety
CAUTION
This switch might have more than one power cord. To reduce the risk of electric shock,
disconnect both power cords before servicing.
CAUTION
Connect the power cord only to a grounded outlet.
CAUTION
This product is designed for an IT power system with phase-to-phase voltage of 230V. After
operation of the protective device, the equipment is still under voltage if it is connected to an IT
power system.