PreSonus StudioLive AI Series - Manual (Page 68)

5 StudioLive Remote-AI for iPad
5.5 Settings Page
StudioLive ™ AI Software Library
Reference Manual
64
Default to Fader Locate. Activates Fader Locate on StudioLive when Fader is
Moved Remotely.
With the Default to Fader Locate preference enabled, Fader Locate will automatically
engage when a fader is moved remotely in StudioLive Remote-AI. This preference
allows you to quickly sync your StudioLive when you return to the board.
Power User Tip: If you are remotely controlling the faders on your StudioLive,
it is highly recommended that you enable this preference. When Fader Locate
Mode is activated, the faders on your StudioLive will not be active. By allowing
this mode to engage automatically, you can easily see what changes have
been made to your fader mix when you go back to your StudioLive.
Channel Naming. Creates Custom Names for Channels, Auxes, and Subgroups.
To create a custom name for any channel, aux, or subgroup in your mix,
simply tap on the text field next to it. This will launch the iPad keyboard. After
you have entered the new name, tap the Done button. The channels’ default
name will be replaced with its new custom name in SL Remote-AI, VSL-AI, and
QMix-AI as well as on the Channel Info page on your StudioLive AI mixer.
Note: Channel Naming in SL Remote-AI can be disabled from the System
Menu on your StudioLive AI-series mixer. If you are unable to change
channel names from SL Remote-AI, verify your device’s permissions.