PreSonus StudioLive AI Series User Manual
Page 45
4
Universal Control-AI and VSL-AI
4.9
Smaart System Check Wizards
StudioLive
™
AI Software Library
Reference Manual
41
7. Click Analyze to generate the frequency-response trace.
8. Adjust the EQ to shape the frequency-response into the correct trend for your
application. (See Sections 4.9.6 and 4.9.7 for best practices.) In general, you do
not want to boost any frequencies, and you do not want to make any cuts greater
than 6 dB. The frequency-response trace will refresh as you make your changes.
9. Disable the Analyze button to continue to make EQ adjustments
without refreshing the trace and to turn off the pink noise.
10. Click Exit to complete the wizard.
Advanced Analysis
1. Select Advanced Analysis from the pull-down menu.
2. Place your microphone on-axis in front of the speaker you want to analyze. If you
are analyzing a stereo bus, place your microphone on-axis in front of the Left
speaker. See Section 4.9.5 for tips in choosing the best primary mic position.
1