PreSonus StudioLive AI Series User Manual
Page 51
4
Universal Control-AI and VSL-AI
4.9
Smaart System Check Wizards
StudioLive
™
AI Software Library
Reference Manual
47
11. Click Analyze.
12. If necessary, adjust the pink noise level for your delay system (the speaker you
want to delay) so that it is louder than the ambient noise floor in the room.
13. Click Analyze to calculate the delay time.
14. When the wizard is finished, you will be shown the measured delay time.
15. Click Apply to set that measure delay time on the subgroup out.
16. Click Exit to leave the wizard.
Note: For delay times between 0 and 50 ms, the delay will be set to the nearest
0.5 ms; between 51 and 100 ms, the delay will be set to the nearest 1 ms; and
between 102 and 300 ms, the delay time will be set to the nearest 2 ms.