Avaya P880 - Manual (Page 43)

A-9 610-0184-095 June 14, 2001
■
To assign a weight of 5 to queue 4, enter:
> queue 4 weight 5
■
To assign a weight of 6 to queue 5, enter:
> queue 5 weight 6
■
To assign a weight of 7 to queue 6, enter:
> queue 6 weight 7
■
To assign a weight of 8 to queue 7, enter:
> queue 7 weight 8
Displaying the Queue Service Settings
Command
Use the show queue-service command to display the settings for
queue service. The correct syntax for this command is:
> show queue-service {|}
[...,{|}]
where
is a slot number
is 0-7
If you specify this parameter, then the settings for all of the ports on
the module in slot
are displayed.
is a slot and port range in the form of 3/1
or 3/1-5 . If you specify this parameter, then the queue service
settings for ports on the module in slot
are displayed.
Examples
To display the queue service settings for port 1 on the module in slot
3, enter:
> show queue-service 3/1