Avaya P880 - Manual (Page 13)

13 610-0184-095 June 14, 2001
2. Enable or disable the suboptions as appropriate in the DHCP
Option - Circuit Info and DHCP Option 82 - Agent Info fields.
Changing the Status of Option 82 by Using the CLI
To use the CLI to change the status of option 82, enter Global
Configuration mode and use the following commands:
■
To enable suboption 1, use the following command:
>(config)# ip dhcp circuit-info
■
To enable suboption 2, use the following command:
>(config)# ip dhcp agent-info
■
To disable suboption 1, use the following command:
>(config)# no ip dhcp circuit-info
■
To disable suboption 2, use the following command:
>(config)# no ip dhcp agent-info
* Note: For information on how to enter Global Configuration
command mode, see “Accessing/Exiting the Command
Modes” in chapter 1 of Cajun P550R/P880/P882 Command
Reference Guide.
Changing the Status of Option 82 by Using SNMP
To change the status of option 82 by using SNMP, use the MIB items
that are listed in Table 3. These MIB items are defined in
cjnipv4serv.mib.
Table 3. MIB, MIB Items and OIDs for Option 82
MIB MIB Item OID
cjnipv4serv.mib cjnDHCPOpt82Sub1Enabled 1.3.6.1.4.1.1751.2.43.2.5.5.1
cjnDHCPOpt82Sub2Enabled 1.3.6.1.4.1.1751.2.43.2.5.5.2