Avaya P880 - Manual (Page 11)

11 610-0184-095 June 14, 2001
Configuring Port Mirroring By Using the Web Agent
Setting Up Port
Mirroring
To use the Web Agent to set up port mirroring:
1. Expand the Modules & Ports folder.
2. Click Port Mirroring.
The Port Mirroring Information page opens.
3. In the Source Port column, select the port that you want to
mirror.
4. In the Mirror Port column, select the port to which you want to
mirror traffic.
Both the source port and mirror port must either:
— Be on the same vlan and have the same vlan binding
or
— Have vlan binding set to bind to all
5. In the Direction column, select the direction of traffic that you
want to mirror.
6. In the Sampler Type column, select how often you want the
mirror port to receive traffic samples.
7. Do one of the following:
8. Click Apply.
IF you select . . . THEN . . .
Periodic in the Sampler
Type column In the Max Packets per
Second column, enter the
maximum number of packets
per second that you want the
mirror port to receive.
Disable or Always in the
Sampler Type column Go to step 8.