Examples, Displaying the port settings, Command – Avaya P880 User Manual
Page 37
A-3
610-0184-095
June 14, 2001
where
is the slot number. If you specify this parameter, then all
ports on the module in slot
are set the same way.
is a slot and port range in the form of
3/1
or
3/1-5
. If you specify this parameter, then only ports
range> on the module in slot are set. {on|off} indicates whether you want the port to ignore tag priority. Enter on for the port to ignore the tag priority. Examples ■ To set all ports on the module in slot 3 to ignore the 802.1p set port ignore-tag-priority 3 on ■ To set ports 1 through 5 on the module in slot 3 to not ignore set port ignore-tag-priority 3/1-5 off ■ To set ports 1 through 5 on the module in slot 3 and port 1 on set port ignore-tag-priority 3/1-5,6/1 on Displaying the Port Settings Command Use the show port command to display the settings of a port. The syntax of the command is: show port [{ [...,{ where is the slot number. If you specify this parameter, then the settings of all the ports on the module in slot are displayed. is a slot and port range in the form of 3/1 or 3/1-5 . If you specify this parameter, then settings for only the ports
tag priority, enter:
the 802.1p tag priority, enter:
the module in slot 6 to ignore the 802.1p tag priority, enter: