Avaya P880 - Manual (Page 34)

610-0184-095 34 June 14, 2001
The steps in ”Modifying OSPF Interfaces” of chapter 11,
“Configuring the OSPF Routing Protocol” should read as follows:
1. Administratively disable the interface on which you want to
modify OSPF.
* Note: You must disable the interface to perform any
OSPF modifications to the interface.
2. In the navigation pane of the Web Agent window, expand the
Routing > IP > OSPF folders.
3. Click Interfaces.
The OSPF Interfaces page opens (Figure 11-4).
4. Modify the OSPF interface parameters. Refer to Table 11-3 for an
explanation of these parameters.
5. Administratively enable the modified interface.
* Note: You must reenable the interface for the switch to
accept the modifications.
Technical Support
To contact Avaya’s technical support:
* Note: These are new phone numbers as of October 1,
2000.
■
From the United States:
1-800-237-0016
■
From North America:
1-800-242-2121
■
Outside North America:
Contact your distributor