AMT Datasouth ACCEL-6300 - Manual (Page 242)

User's Guide
Specifications E-7
Table E-1. Specifications––continued
Item Specifications
Paper Paths and Paper
Paper paths Top and rear; bottom with pull tractor option
or powered bottom-feed tractor on 6310d
and 6350d
Feed methods Friction for cut sheets; tractor for pin-fed paper
Special features Tear bar, first-line printing, auto bail, paper
out and paper jam sensing, demand docu-
ment and paper park, automatic forms thick-
ness detection and print gap adjustment,
remote paper source selection
Cut sheet width
6310, 6310d From 3 to 12 inches (7.6 to 30.5 cm)
6350, 6350d From 3 to 17 inches (7.6 to 43.2 cm)
Pin-feed paper width
6310, 6310d From 4.5 to 11.5 inches (11.4 to 29.2 cm)
including pin-feed tear strips
6350, 6350d From 4.5 to 16.5 inches (11.4 to 41.9 cm)
including pin-feed tear strips
Paper length From 3 to 30.3 inches (7.6 to 77 cm)
Paper thickness
Single sheets Up to 0.015 inch thick
Multipart forms 7-part forms up to 0.024 inch thick
Slew rate 1 to 10 inches per second
Option Bottom-feed pull tractor
User's Guide
Specifications E-7
Table E-1. Specifications––continued
Item Specifications
Paper Paths and Paper
Paper paths Top and rear; bottom with pull tractor option
or powered bottom-feed tractor on 6310d
and 6350d
Feed methods Friction for cut sheets; tractor for pin-fed paper
Special features Tear bar, first-line printing, auto bail, paper
out and paper jam sensing, demand docu-
ment and paper park, automatic forms thick-
ness detection and print gap adjustment,
remote paper source selection
Cut sheet width
6310, 6310d From 3 to 12 inches (7.6 to 30.5 cm)
6350, 6350d From 3 to 17 inches (7.6 to 43.2 cm)
Pin-feed paper width
6310, 6310d From 4.5 to 11.5 inches (11.4 to 29.2 cm)
including pin-feed tear strips
6350, 6350d From 4.5 to 16.5 inches (11.4 to 41.9 cm)
including pin-feed tear strips
Paper length From 3 to 30.3 inches (7.6 to 77 cm)
Paper thickness
Single sheets Up to 0.015 inch thick
Multipart forms 7-part forms up to 0.024 inch thick
Slew rate 1 to 10 inches per second
Option Bottom-feed pull tractor