AMT Datasouth ACCEL-6300 User Manual

Page 132

User's Guide

Solving Problems 6-15

Table 6-1. Troubleshooting Guide––continued

Symptom

Probable Cause/Corrective Action

Characters are missing one or

9 Print density fine-adjustment

more dots.

is set too light. Hold down
Print Density button and re-
adjust print density.

9 PH GAP and PFORCE param-

eters on Setup menu are not
set to Auto, or settings are
incorrect. Check settings.

9 Printhead is damaged or worn.

Replace printhead.

Printer prints garbled text and

9 Wrong printer emulation sel-

paper moves erratically.

ected. Make sure computer
and printer are set for same
printer emulation.

Single sheets do not feed properly. 9

9 Paper is not loaded properly.

Refer to Loading Paper section
for detailed procedure.

9 Wrong paper path selected.

Make sure Top paper path is
selected.

9 PH GAP and PFORCE param-

eters on Setup menu are not
set to Auto, or settings are
incorrect. Check settings.

User's Guide

Solving Problems 6-15

Table 6-1. Troubleshooting Guide––continued

Symptom

Probable Cause/Corrective Action

Characters are missing one or

9 Print density fine-adjustment

more dots.

is set too light. Hold down
Print Density button and re-
adjust print density.

9 PH GAP and PFORCE param-

eters on Setup menu are not
set to Auto, or settings are
incorrect. Check settings.

9 Printhead is damaged or worn.

Replace printhead.

Printer prints garbled text and

9 Wrong printer emulation sel-

paper moves erratically.

ected. Make sure computer
and printer are set for same
printer emulation.

Single sheets do not feed properly. 9

9 Paper is not loaded properly.

Refer to Loading Paper section
for detailed procedure.

9 Wrong paper path selected.

Make sure Top paper path is
selected.

9 PH GAP and PFORCE param-

eters on Setup menu are not
set to Auto, or settings are
incorrect. Check settings.