AMT Datasouth ACCEL-6300 User Manual

Page 137

User's Guide

6-20 Solving Problems

Table 6-1. Troubleshooting Guide––continued

Symptom

Probable Cause/Corrective Action

Printer ejects cut sheets before

9 PGE END setting on Setup

finishing printing on page.

menu is On. Change setting
to Off.

9 LENG setting on Setup menu

does not reflect actual length
of page in use. Change setting.

Forms jam in printer while using

9 Forms are snagging on print-

demand document mode.

head during reverse feed.
Change DEMAND setting to
Tear and try again.

Control panel display goes blank

9 Static shock may have inter-

during printing.

fered with display. When print
job is finished and printer is
idle, turn printer off, wait five
seconds, and turn printer back
on.

Paper park, demand document

9 PATH parameter on Setup

mode, or popup mode does not

menu is set to TopTrac.

operate.

Change setting to None.