AMT Datasouth ACCEL-6300 - Manual (Page 116)

User's Guide
Cleaning and Maintenance 5-9
Inspecting Printer Parts––continued
After you complete the inspection checklist on these two pages, turn on
the printer and run a self test to verify normal operation.
,Caution: Do not inspect the printer with the power turned on.
Figure 5-9. Inspecting the Printer, Rear
‰
INTERFACE CONNECTORS
Detach the cables. Inspect the cables
and connectors for broken wires,
frayed or burned insulation, or loose
fit.
‰
FORMS TRACTORS
Look for obstructions in the paper
path. Remove any dust, paper fibers,
or other foreign matter from inside
the printer. Open and close the trac-
tor locks and doors. Slide the trac-
tors along the shafts. Inspect for
binding or stiff movement.
‰
AC POWER RECEPTACLE
Detach the cord. Inspect the cord
and receptacle for visible signs of
wear or damage.
User's Guide
Cleaning and Maintenance 5-9
Inspecting Printer Parts––continued
After you complete the inspection checklist on these two pages, turn on
the printer and run a self test to verify normal operation.
,Caution: Do not inspect the printer with the power turned on.
Figure 5-9. Inspecting the Printer, Rear
‰
INTERFACE CONNECTORS
Detach the cables. Inspect the cables
and connectors for broken wires,
frayed or burned insulation, or loose
fit.
‰
FORMS TRACTORS
Look for obstructions in the paper
path. Remove any dust, paper fibers,
or other foreign matter from inside
the printer. Open and close the trac-
tor locks and doors. Slide the trac-
tors along the shafts. Inspect for
binding or stiff movement.
‰
AC POWER RECEPTACLE
Detach the cord. Inspect the cord
and receptacle for visible signs of
wear or damage.