Part names and functions – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 2
2
Part Names and Functions
Name
Description
A
Status LED
(POWER)
This LED indicates the GP’s status, e.g. power input, firmware
RUN status or backlight condition.
B
Operation LED
(O.P.)
C Operation Switch
When this switch is enabled and pressed, the GP unit can accept
input from the touch panel and function keys.
D
Function Switches
(11 switches)
The switch functions are set up with the screen design software.
For details, refer to the GP-Pro EX Reference Manual.
E Emergency Switch
⎯
Front
L
H
I
G
M
Q
G
G
F
J, K
O
N
P
F
O
T
E
A
B
C
D
R
Top
Rear
Right Side
CF Card Cover Open
S
Color
Indicator
Operation Mode
Green
ON
OFFLINE
In operation
Red
ON
When power is turned on.
Orange
ON
Backlight burnout
Flashing
During software startup
Not Lit
Power is OFF.
LED
GP Status
Green
Indicates the Operation Switch is ON.
Not Lit
Indicates the Operation Switch is OFF.
- AGP3400 - 7.5 DIO HMI" AGP3300 - 5.7 DIO HMI" AGP3600 - 12.1 FLEX Network HMIs" AGP3500 - 10.4 FLEX Network HMI" AGP3400 - 7.5 FLEX Network HMI" AGP3600 - 12.1 CANopen HMI" AGP3500 - 10.4 CANopen HMI" AGP3400 - 7.5 CANOpen HMI" AGP3300 - 5.7 CANopen HMI" AGP3300H - 5.7 Handheld HMIs" AGP3750 - 15 Multi-Media HMI" AGP3650 - 12.1 Multi-Media HMIs" AGP3550 - 10.4 Multi-Media HMIs" AGP3450 - 7.5 Multi-Media HMI" AGP3360 - 5.7 Multi-Media HMI" AST3300 - 5.7 Basic HMI" AST3200 - 3.8 Basic HMI" AGP3600 - 12.1 Standard HMIs" AGP3500 - 10.4 Standard HMIs" AGP3400 - 7.5 Standard HMI" AGP3300 - 5.7 Standard HMI" AGP3200 - 3.8 Standard HMI"