ATTO Technology FastStream SC 5700 - Manual (Page 53)

vi
CLI command explanations
Command Line Interface commands are listed alphabetically with explanations of what they are used for, their
defaults and syntax.
CAUTION CAUTION
Using CLI without contacting an ATTO technician is not recommended because changing
parameters may cause loss of data and/or disruption to performance and reliability of the
FastStream.
The ExpressNAV Storage Manager is the preferred method to manage the FastStream. Refer to
Interface Options on page 39 for details.
AutoMap
Automatically assigns a subset of source protocol LUNs to a
subset of target destination devices visible to the unit. The unit
reports a five-second delay while it scans for devices. All
previous maps are deleted.
If FCMultiNode is enabled (multiple node):
AutoMap
SaveConfiguration command required
If
FCMultiNode is disabled (single node): AutoMap
SaveConfiguration command required
AutoResume
Regulates the AutoResume features for interrupted
initialization, rebuild and erase operations at startup. If no
GroupName is specified, all existing RAID groups are affected.
Default: enabled for AutoResume Initialize, Rebuild
disabled for AutoResumeErase
set AutoResume [Initialize | Rebuild | Erase | All ]
[enabled | disabled]
SESDiskFailureAlarm (SC 5500, 5700) disabled set sesdiskfailurealarm enabled
SESEnclosures (SC 5500, 5700) sesenclosures
SESIdentify (SC 5500, 5700) set sesidentify RAID g1
SESIdentifyStop (SC 5500, 5700) sesidentifystop all
SESMute (SC 5500, 5700) mute sesmute remind
SESPoll (SC 5500, 5700) 60 set sespoll 20
SESStartingSlot (SC 5500, 5700) 1 set sesstartingslot 2
SESStatus (SC 5500, 5700) sesstatus
SNTP enabled get sntp
SNTPServer 192.43.244.18 set sntpserver 129.6.15.28
TailEventLog taileventlog
Temperature get temperature
Time set time 03:32:30
TimeZone EST set timezone pst
Username root set username Barbara
VerboseMode enabled set verbosemode disabled
VirtualDriveInfo virtualdriveinfo
Voltage (SC 5300, 5700) get voltage
WrapEventLog enabled set wrapeventlog disabled
zModem zmodem receive
Command Default Example