IEI Integration ECW-281B_B2-D525 - Manual (Page 77)

ECW-281B/B2-D525 Embedded System
Page 64
5.3.5.1.6 Serial Port 2 Configuration
Î Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.
Î
Disabled Disable the serial port
Î
Enabled D EFAULT
Enable the serial port
Î Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Î
Auto D EFAULT
The serial port IO port address and interrupt address
are automatically detected.
Î
IO=2C8h;
IRQ=10
Serial Port I/O port address is 2C8h and the interrupt
address is IRQ10
Î
IO=2C0h;
IRQ=10, 11
Serial Port I/O port address is 2C0h and the interrupt
address is IRQ10, 11
Î
IO=2C8h;
IRQ=10, 11
Serial Port I/O port address is 2C8h and the interrupt
address is IRQ10, 11