2 lan connection, 3 usb connection – IEI Integration NANO-HM651 User Manual

Page 72

NANO-HM651 EPIC SBC

Page 58

4.9.2 LAN Connection

There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection

to an external network. To connect a LAN cable with an RJ-45 connector, please follow

the instructions below.

Step 1:

Locate the RJ-45 connectors. The locations of the USB connectors are shown

in Chapter 3.

Step 2:

Align the connectors. Align the RJ-45 connector on the LAN cable with one of

the RJ-45 connectors on the NANO-HM651. See

Figure 4-17.

Figure 4-17: LAN Connection

Step 3:

Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN

cable RJ-45 connector into the onboard RJ-45 connector.

Step 0:

4.9.3 USB Connection

The external USB Series "A" receptacle connector provides easier and quicker access to

external USB devices. Follow the steps below to connect USB devices to the

NANO-HM651.

Step 1:

Locate the USB Series "A" receptacle connectors. The location of the USB