IEI Integration NANO-HM651 - Manual (Page 52)

NANO-HM651 EPIC SBC
Page 38
4.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
NANO-HM651 may result in permanent damage to the NANO-HM651
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the NANO-HM651. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the NANO-HM651 or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
ƒ Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
ƒ Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
ƒ Use an anti-static pad: When configuring the NANO-HM651, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
NANO-HM651.
ƒ Only handle the edges of the PCB: When handling the PCB, hold the PCB
by the edges.