IEI Integration KINO-DH610 - Manual (Page 52)

KINO-DH610
Page 40
4.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
KINO-DH610 may result in permanent damage to the KINO-DH610
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the KINO-DH610. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the KINO-DH610 or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
 Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad: When configuring the KINO-DH610, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
KINO-DH610.
 Only handle the edges of the PCB: When handling the PCB, hold the PCB
by the edges.