IEI Integration PCIE-G41A2 - Manual (Page 78)

PCIE-G41A2 PICMG 1.3 CPU card
Page 66
5.3.4 Super IO Configuration
Use the Super IO Configuration menu (BIOS Menu 7) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Configure ITE8718 Super I/O Chipset
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Parallel Port Address
[378]
Parallel Port Mode [Normal]
Parallel Port IRQ [IRQ7]
Serial Port1 Address [3F8/IRQ4]
Serial Port1 Mode [Normal]
Serial Port2 Address [2F8/IRQ3]
Serial Port2 Mode [Normal]
Allows BIOS to select
Serial Port Base
Addresses
Select Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 7: Super IO Configuration
Parallel Port Address [Disabled]
Use the Parallel Port Address option to select the parallel port base address.
Disabled D EFAULT No base address is assigned to the Parallel Port
378 Parallel Port I/O port address is 378
278 Parallel Port I/O port address is 278
3BC Parallel Port I/O port address is 3BC
Parallel Port Mode [Normal]
Use the Parallel Port Mode option to select the mode the parallel port operates in.
Normal D EFAULT The normal parallel port mode is the standard mode
for parallel port operation.