Figure 4-2: remove protective cover, Figure 4-3: cpu socket load plate – IEI Integration PCIE-G41A2 User Manual

Page 50

PCIE-G41A2 PICMG 1.3 CPU card

Page 38

Step 1:

Remove the protective cover. The black protective cover can be removed by

pulling up on the tab labeled "Remove". See Figure 4-2.

Figure 4-2: Remove Protective Cover

Step 2:

Open the socket. Disengage the load lever by pressing the lever down and

slightly outward to clear the retention tab. Fully open the lever, then open the

load plate. See Figure 4-3.

Figure 4-3: CPU Socket Load Plate

Step 3:

Inspect the CPU socket. Make sure there are no bent pins and make sure the

socket contacts are free of foreign material. If any debris is found, remove it with

compressed air.