IEI Integration PCIE-G41A2 - Manual (Page 56)

PCIE-G41A2 PICMG 1.3 CPU card
Page 44
Description Label Type
Clear CMOS jumper J_CMOS1 3-pin header
Table 4-1: Jumpers
4.3.1 Clear CMOS Jumper
Jumper Label: J_CMOS1
Jumper Type: 3-pin header
Jumper Settings: See Table 4-2
Jumper Location: See Figure 4-8
To reset the BIOS, move the jumper to the "Clear BIOS" position for 3 seconds or more,
and then move back to the default position.
Setting Description
1-2 Normal (Default)
2-3 Clear BIOS
Table 4-2: Clear BIOS Jumper Settings
Figure 4-8: Clear BIOS Jumper Location
4.4 Internal Peripheral Device Connections
This section outlines the installation of peripheral devices to the onboard connectors.
4.4.1 Dual RS-232 Cable with Slot Bracket
The dual RS-232 cable slot connector consists of two connectors attached to two
independent cables. Each cable is then attached to a D-sub 9 male connector that is
mounted onto a slot. To install the dual RS-232 cable, please follow the steps below.