IEI Integration PCIE-G41A2 - Manual (Page 62)

PCIE-G41A2 PICMG 1.3 CPU card
Page 50
Figure 4-14: USB Connector
4.5.3 VGA Monitor Connection
The PCIE-G41A2 has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the PCIE-G41A2, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
PCIE-G41A2. See Figure 4-15.