Extron Electronics SSP 7.1 User Guide - Manual (Page 87)

X1^ — Speaker group size
0 = None (invalid for front speakers)
1 = Small
2 = Large
(defaults: Front = 2; Center = 1; Surround = 1)
X1& — Crossover Frequency 1 to 20 (default = step 11/100 Hz)
1 to 9 = 40 to 80 Hz in 5 Hz increments
9 to 16 = 80 to 150 Hz in 10 Hz increments
16 to 20 = 150 to 250 Hz in 25 Hz increments
X1( — Dolby Pro Logic IIx Music Center Width Control
(Range 0-7; default = 3)
X2) — DTS Neo:6 Music/Cinema Center Image (Range 0-10; default = 3 for DTS Neo:6
Music and 10 for DTS Neo:6 Cinema)
X2! — Version (x.xx)
X2@ — version and build number (x.xx.xxxx)
X2$ — Source Format (Source LED on front panel)
0 = Not Present
1 = Analog (2-CH)
2 = PCM (PCM and 2-CH)
3 = Dolby Digital 5.1 ( D)
4 = Dolby Digital 2/0 (when 2/0 encoding flag is detected) ( D and 2-CH)
5 = Dolby Digital 2/0 Surround (when 2/0 matrix encoding is detected) ( D
and 2-CH)
6 = Dolby Digital Surround EX (when EX encoding flag is detected) ( D)
7 = DTS Digital Surround or DTS 96/24 (DTS)
8 = DTS-ES Matrix 6.1 or DTS 96/24 ES Matrix 6.1 (When ES Matrix encoding
flag is detected) (DTS)
9 = DTS-ES Discrete 6.1 (When ES Discrete encoding flag is detected) (DTS)
10 = DTS 2-Channel (DTS and 2-CH)
X2% — Source Format Sampling Frequency
0 = None
1 = 32 kHz
2 = 44.1 kHz
3 = 48 kHz
4 = 88.2 kHz
5 = 96 kHz
X2^ — Source Format Encoded Channels
0 = None 9 = 3/0
1 = 1/0 10 = 3/0.1
2 = 1/0 .1 11 = 3/1
3 = 2/0 12 = 3/1.1
4 = 2/0.1 13 = 3/2
5 = 2/1 14 = 3/2.1
6 = 2/1.1 15 = 3/3
7 = 2/2 16 = 3/3.1
8 = 2/2.1
SSP 7.1 • SIS Commands 81