Vanguard IRM-5000P User Manual

Page 50

IRM-5000P USER’S MANUAL

REV 2

3.2.5. Erasing Test Records From the Flash EEPROM

You can erase individual or all test records stored in the IRM-5000P’s Flash EEPROM. To erase a
test record:

a. Start from the “START-UP” menu:

Press the

[2]

key (UTILITIES).

b. The following screen will be displayed:

Press the

[2]

key (SAVE/RES).

c. The following screen will be displayed:

Press the

[3]

key (ERASE).

d. The following screen will be displayed:

1. ERASE SINGLE TEST

Press the

[1]

key if you would like to erase a single test record from the IRM-

5000P’s Flash EEPROM. The following screen will be displayed:

NOTE

Press the

[STOP]

key If you selected the erase option by mistake or

do not wish to erase a test record. You will be returned to the “START-
UP” menu.

ERASE TEST
NUMBER:

TERMINAL VTG: 1 V

1. ERASE SINGLE TEST
2. ERASE ALL TESTS

TERMINAL VTG: 1 V

1.SAVE 2.RESTORE
3.ERASE 4.DIRECTORY

TERMINAL VTG: 1 V

1.PRINT 2.SAVE/RES
3.SETUP

TERMINAL VTG: 1 V

RUN TEST 05/05/10

2. UTILITIES 15:15:15

Bat:

TERMINAL VTG: 1 V