Vanguard IRM-5000P - Manual (Page 48)

IRM-5000P USER’S MANUAL REV 2
44
3.2.4. Printing a Directory of Test Records Stored in the IRM-5000P’s Memory
You can print a directory of all the test records stored in the IRM-5000P’s Flash EEPROM using
the steps below:
a. Start from the “START-UP” menu:
Press the
[2]
key (UTILITIES).
b. The following screen will be displayed:
Press the [2] key (SAVE/RES).
c. The following screen will be displayed:
Press the [4] key (DIRECTORY).
d. The following screen will be displayed:
1. FULL
Press the [1] key (FULL) to print a directory of all the test records stored in the
IRM-5000P’s Flash EEPROM. A sample test record directory printout is shown in
Figure 15.
2. BRIEF
Press the [2] key (BRIEF) to print a directory of the last 15 test records stored in
the IRM-5000P’s Flash EEPROM. A sample test record directory printout is shown
in Figure 15.
TEST DIRECTORY
1.FULL 2.BRIEF
TERMINAL VTG: 1 V
1.SAVE 2.RESTORE
3.ERASE 4.DIRECTORY
TERMINAL VTG: 1 V
1.PRINT 2.SAVE/RES
3.SETUP
TERMINAL VTG: 1 V
1. RUN TEST 05/05/10
2. UTILITIES 15:15:15
Bat:
TERMINAL VTG: 1 V