Vanguard IRM-5000P - Manual (Page 45)

REV 2 IRM-5000P USER’S MANUAL
41
3.2.2. Restoring a Test Record From Flash EEPROM
You can restore a test record from the IRM-5000P’s Flash EEPROM to the working memory. You
can then print the restored test record on the unit’s built-in thermal printer (see section 3.2.3
for printing instructions). To restore a test record:
a. Start from the “START-UP” menu:
Press the
[2]
key (UTILITIES).
b. The following screen will be displayed:
Press the
[2]
key (SAVE/RES).
c. The following screen will be displayed:
Press the [2] key (RESTORE).
d. The following screen will be displayed:
Type the test record number that you would like to restore and then press the
[ENTER]
key. If you do not know the record number, you can first print a test record
directory using the instructions in section 3.2.4.
e. The selected test record will be restored to the working memory and the following
screen will be displayed:
Press any key to return to the “START-UP” menu.
TEST NUMBER 8
RESTORED!
TERMINAL VTG: 1 V
RECALL TEST
NUMBER:
TERMINAL VTG: 1 V
1.SAVE 2.RESTORE
3.ERASE 4.DIRECTORY
TERMINAL VTG: 1 V
1.PRINT 2.SAVE/RES
3.SETUP
TERMINAL VTG: 1 V
1. RUN TEST 05/05/10
2. UTILITIES 10:15:15
Bat:
TERMINAL VTG: 1 V