Vanguard EZCT-2000B - Manual (Page 99)

REV 1 EZCT-2000B USER’S MANUAL
95
4.3 Setting the Clock
To set the EZCT-2000B’s internal clock:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the [6] key (NEXT PAGE).
c. The following screen will be displayed:
Press the [1] key (SET TIME).
d. The following screen will be displayed:
Enter the month, date, time, hours, minutes, and seconds (in 24-hour format) using the
alpha-numeric keypad. When the last digit is entered, the clock will be set and you will
be returned to the “START-UP” menu.
ENTER
mm-dd-yy hh:mm:ss
_
1. SET TIME
2. buried ct in delta
3. knee point marker
4. print raw data
1. RECORD ID
2. PRINT RECORD
3. RECORD DIRECTORY
4. SAVE/RESTORE RECORD
5. ERASE RECORD
6. NEXT PAGE
1. RUN TEST 06/17/09
2. SETUP 10:14:25
3. TEST PLANS
4. DIAGNOSTICS
5. CURRENT SOURCE