Vanguard EZCT-2000B - Manual (Page 77)

REV 1 EZCT-2000B USER’S MANUAL
73
Continue with the steps below:
1. ERASE SINGLE PLAN
Press the [1] key if you would like to erase a single test plan. The following
screen will be displayed:
Type the test plan number that you would like to erase and press the [ENTER]
key.
NOTES
• You can press the [STOP] key to cancel the process.
• If you do not know the test plan number, you can print a test
plan directory using the instructions in section 3.5.2.
The selected test plan will be erased and the following screen will be displayed:
Press any key to return to the “START-UP” menu.
2. ERASE ALL PLANS
Press the
[2]
key if you would like to erase all test plans. The following screen
will be displayed:
TEst plan number 1
erased!
ERASE TEST PLAN
NUMBER:
ERASE TEST PLAN
1. ERASE SINGLE PLAN
2. ERASE ALL PLANS