Vanguard EZCT-2000B User Manual

Page 60

EZCT-2000B USER’S MANUAL

REV 1

1. COPY SINGLE RECORD

Press the

[1]

key (COPY SINGLE RECORD) if you would like to copy a single record

from the EZCT-2000B to the USB Flash drive. The following screen will be
displayed:

Type the record number that you would like to copy to the USB Flash drive and
then press the

[ENTER]

key.

NOTE

If you do not know the record number, you can first print a test
record directory using the instructions in section 3.4.4.

The following screen will be displayed showing the status of the copy process:

NOTES

Any existing test records on the USB Flash drive will NOT be erased.
The EZCT-2000B will automatically increment the record number for
newly copied test records.

After the record has been copied, the following screen will be displayed:

Press the

[1]

key (YES) if you would like to copy another record and repeat the

process above.

Press the

[2]

key (NO) to return to the “START-UP” menu.

rec 000 saved to
thumb drive

copy another record?
1. YES
2. NO

SAving record

to thumb drive

ENTER RECORD NUMBER

to copy to flash drv

NUMBER: