Vanguard EZCT-2000B User Manual
Page 107
REV 1 EZCT-2000B USER’S MANUAL
103
6.0 UPGRADING FIRMWARE
The EZCT-2000B’s firmware is user-upgradeable. You can download the latest firmware from
the Vanguard Instruments Company web site at
http://www.vanguard-instruments.com
. Use
the steps below to download and install the latest EZCT-2000B firmware:
a. Visit the Vanguard web site at
http://www.vanguard-instruments.com
and click on the
“Downloads” button:
b. You will be taken to the “Downloads” page and presented with a “Download Request
Form”:
Fill out all required fields (marked with red labels) and then click on the “Firmware”
checkbox to the right of the “EZCT-2000B” label. Then fill out the serial number field on
the right. Click on the “Submit” button once all form fields have been filled out.
c. The following confirmation page will be displayed:
- Resistor Transducer Adapter 9095-UC (7 pages)
- Accu-Ohm 200 S2 (4 pages)
- Accu-Trans (28 pages)
- ATO-400 (43 pages)
- ATO-400P (44 pages)
- Auto-Ohm (22 pages)
- Auto-Ohm 100_200 s2 (31 pages)
- Auto‐Ohm 200 S3 (66 pages)
- DMOM-100 (35 pages)
- DMOM-100_200 s2 (42 pages)
- DMOM-200 (33 pages)
- Herculito (17 pages)
- ATRT-01 S2 (59 pages)
- ATRT-01_01B S3 (88 pages)
- ATRT-01_01B_01D (31 pages)
- ATRT-03_03A (114 pages)
- ATRT-03_03A S2 (147 pages)
- CVT-765 (46 pages)
- Tri-Phase (155 pages)
- CBCT (14 pages)
- CBPS-300 (16 pages)
- CT-3500 (24 pages)
- CT-3500 S2 (53 pages)
- CT-6500 (69 pages)
- CT-6500 S2 (82 pages)
- CT-7000 (83 pages)
- CT-7000 S2 (108 pages)
- CT-7000 S3 (137 pages)
- CT-7500 (76 pages)
- CT-7500 S2 (110 pages)
- CT-8000 (120 pages)
- CT-8000 S3 (145 pages)
- DigiTMR (86 pages)
- DigiTMR S2 (123 pages)
- DigiTMR S2 PC (31 pages)
- MCCB-250 (17 pages)
- UPS S2 (13 pages)
- EZCT-2000 (68 pages)
- EZCT-2000 (45 pages)
- EZCT-2000A (103 pages)
- EZCT-2000C Plus (119 pages)
- EZCT-S2 (66 pages)
- EZCT-S2A (98 pages)
- IRM-5000P (58 pages)