Vanguard EZCT-2000B - Manual (Page 25)

REV 1 EZCT-2000B USER’S MANUAL
21
Press the [ENTER] key. The following screen will be displayed:
Type the second number using the keypad and then press the [ENTER] key.
Continue to step g.
2. NO
Press the
[2]
key if you do not want to enter the CT nameplate values. Continue
to step g.
g. The following screen will be displayed:
Use the alpha-numeric keys on the keypad to enter a test note. The test note field is 20
characters long. One test note can be saved for each test.
When pressing a key, the corresponding number on the key will be displayed first.
Pressing the key again will display the first letter on the key. Pressing the key again will
display the second letter on the key. For example, to type the letter “A”, you must press
the
[2]
key twice. To erase the character at the cursor position, press the
[CLEAR]
key.
Press the [PAPER ∧ Contrast] button to move to the next character. Press the
[PAPER ∨ Contrast] key to move to the previous character. Press the [ENTER] key
when you are done typing the note.
h. The following screen will be displayed:
Press the [1] key (YES). Selecting this option will print the current ratio error table and
current phase error table as part of the tabulated test results. Please see Figure 9, items
19 and 20.
calc err vs burden?
1. yes
2. no
ENTER TEST 1 NOTE:
_
↑↓
to position
"ENTER" TO ACCEPT
ENTER PLATE RATIO:
1000 : 5.0
ENTER PLATE RATIO:
1000 : 0.0