Vanguard EZCT-2000B - Manual (Page 46)

EZCT-2000B USER’S MANUAL REV 1
42
3.4 Working With Test Records
3.4.1. Restoring and Printing a Test Record From Flash EEPROM
You can restore a test record from the EZCT-2000B’s Flash EEPROM to the working memory.
You can then print the restored test record on the unit’s built-in thermal printer. To restore a
test record:
a. Start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the
[4]
key (SAVE/RESTORE RECORD).
c. The following screen will be displayed:
NOTE
If you have a USB Flash drive inserted in the EZCT-2000B’s “USB MEM” port,
the following screen will be displayed instead of the above screen:
Press the [1] key (RESTORE RECORD).
The following screen will be displayed:
1. RESTORE RECORD
2. COPY TO THUMB DRIVE
RESTORE RECORD
1. enter record number
2. scroll to select
1. RECORD ID
2. PRINT RECORD
3. RECORD DIRECTORY
4. SAVE/RESTORE RECORD
5. ERASE RECORD
6. NEXT PAGE
1. RUN TEST 06/17/09
2. SETUP 07:39:39
3. TEST PLANS
4. DIAGNOSTICS
5. CURRENT SOURCE