Vanguard CT-7000 S2 - Manual (Page 62)

CT-7000 S2 USER’S MANUAL REV 2
57
3.2.5. Printing or Viewing Timing Results
Follow the steps below to print or view the timing results after performing a circuit breaker
timing test:
a. After performing a timing test you will be returned to the “START-UP” menu:
Press the
[2]
key (GET RSLT).
b. The following screen will be displayed:
1. PRINT TEST RESULTS
Press the [1] key to view the test results on the screen or to print the tabulated test
results WITHOUT the graph. The following screen will be displayed:
Press the
[1]
key (THERMAL PRINTER) to print the tabulated test results on the
built-in thermal printer. The tabulated results will be printed, and you will be
returned to the “START-UP” menu. A typical tabulated results printout is shown in
Figure 19.
Press the [2] key (DISPLAY RESULTS) to display the test results on the unit’s LCD
screen. The following screen will be displayed:
Press the
[PAPER ∧ Contrast]
and
[PAPER ∨ Contrast]
keys to scroll
through the test results. Press the [STOP] key to return to the “START-UP”
menu.
UP/DWN ARROWS TO
SCROLL RESULTS...
“STOP” TO EXIT
SELECT PRINTER:
1. THERMAL PRINTER
2. DISPLAY RESULTS
1. PRINT TEST RESULTS
2. PLOT FULL CHART
3. PLOT EXPANSION
4. PLOT 0 – 200MS
1. TIME BRKR 02/10/11
2. GET RSLT 09:04:05
3. SETUP
4. DIAGNOSTICS