Vanguard CT-7000 S2 - Manual (Page 24)

CT-7000 S2 USER’S MANUAL REV 2
19
h. The following screen will be displayed:
Type the model information using the alpha-numeric keypad and then press the
[ENTER] key.
i. The following screen will be displayed:
Type the serial number using the alpha-numeric keypad and then press the [ENTER]
key.
j. The following screen will be displayed:
Type the operator’s name using the alpha-numeric keypad and then press the [ENTER]
key. All header information will be saved, and you will be returned to the “START-UP”
menu.
OPERATOR:
↑↓ TO POSITION
“ENTER” TO ACCEPT
SERIAL NUMBER:
↑↓ TO POSITION
“ENTER” TO ACCEPT
MODEL:
↑↓ TO POSITION
“ENTER” TO ACCEPT