Vanguard CT-7000 S2 - Manual (Page 56)

CT-7000 S2 USER’S MANUAL REV 2
51
g. The following screen will be displayed:
Hold down the [ARM] switch and press the [START] key.
h. The following screen will be displayed:
Continue to hold down the [ARM] switch until testing is finished. You will be returned
to the “START-UP” menu once testing is finished.
TEST IN PROGRESS
Hold “ARM” until
test completes.
(Up to 25 seconds)
Hold “ARM” until
test completes.
“START” to Begin
“STOP” to ABORT