Vanguard CT-7000 S2 User Manual

Page 44

CT-7000 S2 USER’S MANUAL

REV 2

e. The following screen will be displayed:

Press the

[1]

key to enter the transducer travel distance per volt using English units, or

press the

[2]

key to enter the transducer travel distance per volt using Metric units.

f. The following screen will be displayed:

Move the transducer to the reference position and press the

[ENTER]

key.

g. The following screen will be displayed:

Move the transducer a known distance and press the

[ENTER]

key.

h. The following screen will be displayed (the units of measure displayed will depend on

your choice in step e):

Using the numeric keypad, enter the distance the transducer was moved and then press
the

[ENTER]

key.

i. The following screen will be displayed:

If you prefer, you can enter a note to be associated with the setup using the alpha-
numeric keypad. Press the

[ENTER]

key when done typing.

ENTER SETUP NOTE:

↑↓ TO POSITION

“ENTER” TO ACCEPT

ENTER THE DISTANCE
MOVED:
IN
“ENTER” TO CONTINUE

MOVE RES ENCODER A

KNOWN DISTANCE...

“ENTER” TO CONTINUE

MOVE RES ENCODER TO
REFERENCE POSITION.

“ENTER” TO CONTINUE

RESISTIVE ENCODER
1. ENGLISH (IN/Volt)

2. METRIC (MM/Volt)