Vanguard CT-7000 S2 User Manual

Page 22

Text mode
Original mode

CT-7000 S2 USER’S MANUAL

REV 2

3.1.7. Pre-Test Setup

3.1.8. Entering Test Record Header Information

You can enter the test record header information before performing tests. The record header
includes identifying information such as the company, station, circuit, model number, etc. Once
the header information has been entered, it will apply to all subsequent test records. To enter
the header information:

a. When the unit is turned on and the firmware is loaded, you will be presented with the

“START-UP” menu as shown below:

Press the

[3]

key (SETUP).

b. The following screen will be displayed:

Press the

[4]

key (NEXT PAGE).

c. The following screen will be displayed:

Press the

[1]

key (SHOT DESCRIPTION).

1. SHOT DESCRIPTION

2. NUMBER OF CHANNELS

3. SET DATE & TIME

4. NEXT PAGE

1. ANALYSIS POINTS

2. MEASUREMENT UNITS

3. SAVE / RESTORE

4. NEXT PAGE

1. TIME BRKR 02/03/11

2. GET RSLT 09:04:05

3. SETUP

4. DIAGNOSTICS