Vanguard DMOM-100_200 s2 - Manual (Page 40)

DMOM-100/200 Series 2 Operating Procedures
40
Rev 2, 2009
Table 13.0 Calibration Check Procedure (Continued)
STEP ACTION DMOM DISPLAY
13-8 Automatic. No operator action required.
13-9 Press any key to end the CALIBRATION
CHECK. The display will return to the
START MENU.
Figure 17.0 Calibration Connection (Separated Leads)
Figure 18.0 Calibration Connection (Combined Leads)
CAL CHECK COMPLETE
PRESS ANY KEY